• Mesh made of stainless steel or blackened copper
• Laminated in 2-layer plastic
• Single-sided self-adhesive with protective foil
• For application on unshielded windows and displays made of glass, acrylic, polycarbonate, etc.

This transparent conductive metal mesh PET film is an optical PET film coated with a copper grid and protected with a nickel layer. This film provides better conductivity than our best 9900 series transparent shielding film and is only slightly less transparent. The film features a conductive layer with a very fine etched mesh that is integrated with the transparent substrate.

Transparent conductive PET film with metal mesh remains highly transparent, is extremely low-resistance for high-frequency EMI shielding applications, and is easy to apply. The copper mesh is nearly invisible.

A new series of EMI/RFI-shielded glass has been developed. Our EMI/RFI-shielded glass 9600 series is a float glass with non conductive coating on one side to prevent EMI/RFI.

Applications:
• LCD displays
• Membrane keypads
• Touchscreens
• Medical devices
• Test and measurement equipment
• Defense/aviation, etc.

The windows are designed for both high and low shielding effectiveness. Depending on the layering of the shielding film, they can cover both low and high-frequency ranges.

Version 1 is specifically for the EMI/RFI high-frequency range. The window has a thickness of 10 cm and is available in either a 3-layer or 4-layer version. It can achieve shielding performance of over 120 dB.

Version 2 is designed for the low-frequency range, specifically for MRI/RFI applications, where the shielding is 100 dB at 300 MHz.

Antistatic polyester film with adhesive backing.

Polyester film with a transparent layer of conductive coating. It does not shield as strongly as mesh film but is more transparent.

Instantly mountable windows made from transparent shielding foil. Very high transparency, making them particularly suitable for applications where this property is especially desired.

• With conductive textile covering
• Also available in waterproof version
• For shielding cables and connecting cabinets and rooms
• Custom-made to customer specifications

Conductive mesh is made of stainless steel. The material is very light and allows airflow. The maximum material width is 2000mm wide and usable for large applications. Stainless steel conductive mesh fabric offers excellent surface conductivity, shielding effectiveness, and corrosion resistance for a variety of applications.

• Conductive-coated polyester film; excellent light transmission and shielding properties; no moiré effect
• Silver-coated film, 0.175 mm thick
• Surface resistance typically 8 Ohm/sq
• Available forms: sheet material, roll, or custom-cut; optional anti-reflective coating
• Note: sensitive silver layer on the back

• With laminated EMC grid, at any angle, to prevent moiré effect
• Possibly multi-layered
• For maximum shielding effectiveness
• Up to 1900x1000 mm
• Also available in polycarbonate
• Also with optical filters and anti-reflective coating
• With "Flying Mesh" or metal frame
• Possibly including sealing

• Embedded EMC grid
• Angles customizable (to prevent moiré effect)
• Made from HSR (High-Strength Resin)
• Mechanically robust
• Chemically stable
• Also available in colored versions, with optical filters, and anti-reflective coating
• With "busbar" and optionally including sealing

EMC/RFI/EMP-shielded doors for use in Faraday cages and EMC/RFI-shielded rooms.

Options
• Fire-resistant
• Automatic closing
• Gas-tight
• (Automatic) locking system
• Noise reduction
• Cleanroom specification

We supply windows for shielded rooms/Faraday cages with very high shielding performance for EMC, RFI, and EMI. The windows are custom-made to your specifications.

• Polyester film, 0.175 mm
• Thin and flexible
• Silver coating
• High shielding effectiveness
• High light transmission
• Color-neutral
• IR-reflective
• Also available with anti-reflective coating

• Grids made of extremely thin copper or steel wires with 10,000 openings per square inch
• Also available in blackened version
• Ideal for LED or fluorescent displays
• For prototype construction, available as sheet material in 50 x 50 cm or 100 x 100 cm
• For mass production, available on rolls in various widths
• Attenuation: between 45 and 72dB

• Standard screen printing or UV direct printing
• Multi-color printing
• Custom color shades
• Also technical printing materials (e.g., silver conductive ink)

• Manufactured according to customer specifications

Information we require:
• Outer dimensions of the window
• Thickness of the window, edge design, and if applicable, dimensions of the stepped construction
• Position and size of mounting holes
• Surface finish (anti-reflective)

These shielding windows offer a high level of shielding effectiveness with minimal light loss.